Free shipping over $200CAD, 100% Canadian no hidden fees . Did not find a part you need ? Please chat with us or send us an email and we will quote you. If order is time sensitive please contact us for ETA. Oversized items such as body panels & few exhaust systems may have extra shipping cost depending on location.
Cart 0
HKS Hipermax R 2015 + Mazda Miata ND / ND2 ND5RC Full Kit Coilover
HKS

HKS Hipermax R 2015 + Mazda Miata ND / ND2 ND5RC Full Kit Coilover

Regular price $2,900.00 $0.00 Unit price per
Shipping calculated at checkout.

Part #: hks80310-AZ002

 

R

Code No. 80310-AZ002

 

  

The fun to drive at will and the balance can be adapted from circuit to winding road. 
Reised Driving-Comfort, "Ultimate All-Rounder"

 

 

The model in the photo is ND5RC.

 

 

 

Application

Engine P5-VP
Model Year 15/05 - 
Remarks Cultivated with SpecialPackage MT and LeatherPackage AT vehicles

Specification

  FRONT REAR
Damping force adjustment 30 steps 30 steps
Base valve - -
Height adjustable lower bracket
Upper mount Spherical bearing Spherical bearing
Inverted/Normal type Normal Normal
Damper/Spring layout Coilover Coilover
Spring rate change at factory Possible Possible
Damping force adjustment with wire -
Helper spring
(Spring rate N/mm)
- 〇 (19.8)
Ride Heightmm
  Factory *2 Test data Adjustable range
High - Low *3
Drivable range
High - Low *4
FRONT Ride height *1 619 605 655 ~ 605 655 ~ 605
Against stock -36 -50 0 ~ -53 0 ~ -50
REAR Ride height *1 617 607 651 ~ 607 651 ~ 607
Against stock -41 -51 -7 ~ -51 -7 ~ -51

 

*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.


Kit information

Spring of Full Kit

  F R
Spring rate N/mm(kgf/mm) 78 ( 8.0 ) 59 ( 6.0 )
Free height (mm) 200 200
Spring type Straight Straight
Recommended range to change spring rate N/mm(kgf/mm) ±10 ( 1 ) +10 ( 1 )

Specification of damper

  F R
Damping force (Rebound/Damping)N* 849 / 407 241 / 343
Default position of dial 15 15
Remaining damper stroke (Rebound/Damping)mm 36 / 63 56 / 70

* The value of the damping force is at piston speed of 0.1m/sec.

Setting data

  F R
Default Test Drivable limit
High *
Drivable limit
Low *
Default Test Drivable limit
High *
Drivable limit
Low *
Length of
case (mm)
345 335 371 335 335 326 366 326
Spring
Set length(mm)
199 199 199 257 257 257
Length to ride hight
adjuster (mm)
55 45 81 45 54 45 85 45
Lever ratio 1.40 1.10

* Refer to the above explanation *3 of ride height information for drivable high and low limitations.



Test vehicle information

  F R
Vehicle weight kg - (530) - (480)
Tire size (Air pressure) kPa 215 / 40 - 17 ( 200 ) 215 / 40 - 17 ( 200 )
Wheel size 7.5 JJ × 17 inset 38 7.5 JJ × 17 inset 38
Alignment
(Toe/Camber)
Test data 0 mm / -2°30' 0 mm / -2°19'
Standard value in 1.6 ± 2 mm / -0°30' ± 0°45' in 3 ± 2 mm / -1°23' ± 0°45'

* Test data at HKS.


 

Parts List   * It may be changed without prior notice.

 


Point

HIPERMAX R is born with the latest theory in addition to cultivated through the popular HIPERMAX IV SP. A thorough review of each component and the know-how cultivated through the HIPERMAX S were totally utilized, resulting in an amazing evolution.
The new kit is released by equipping the new parts in addition to the know-how cultivated by HKS. The ride quality has been changed from conventional dampers.
The ND Roadster model has bonded bracket bushings with the front and rear stabilizers. When the ride height is lowered from stock condition, the stabilizer constantly absorbs the bush reaction force, which prevents coilover from performing well.
Three settings of stabilizer were thoroughly tested at Fuji Speedway: adoption of the stock stabilizer with bonded bushings, adoption of stabilizer with detachable bushing, adoption without stabilizer.
The test vehicle is the "S Special Package" model, and a strut tower bar that is factory-installed on the "NR-A" model was also adopted for the test.
At Fuji Speedway, please make adjustments according to your preference from 5 notches back from the front and rear tightening side.
By installing front and rear retainers, the rate change is minimized while the spring is compressed and abrupt movement changes are suppressed.
Although it is the vehicle height at testing, there is a risk that the kit is interferenced with the inner fender depending on the tire size, model or suspension alignment.
 


Share this Product