This Flowmaster American Thunder® cat-back exhaust system for the 2000-2006 Toyota Tundra trucks with the 4.7L engine is perfect for the person looking for a deep aggressive exterior sound with a moderate interior tone, and with all of the performance benefits that you would expect from Flowmaster®. This bolt-on DOR/DOS (Dual Out Rear or Dual Out Side) emissions-legal exhaust system features 16-gauge mandrel-bent aluminized steel tubing flowing into a specially designed resonator, a Super 50™ Series performance muffler and an aluminum heat shield with long stainless steel clamps. The dual 2.50-inch aluminized steel tailpipes which use the factory hanger locations for an easy installation, also include two choices for tailpipe exits, either behind the rear wheels, which is ideal for towing, or straight out the back under the rear bumper for a muscular look. The system is finished off with a pair of large 3.00-inch polished stainless steel tips and is covered by our 3-year Limited Warranty. The system includes all necessary parts and hardware for an easy installation you can do at home. For those who prefer all stainless steel construction with a Lifetime Limited Warranty, check out exhaust system #817425. Notes: Fits both 2/4 wheel drive models and all wheelbases.
Features:
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16-gauge Aluminized Steel Tubing
- Moderately Aggressive Exterior Exhaust Tone
- Dyno Tuned for Maximum Performance
- 3.00-inch Polished Stainless Steel Tips
- Super 50 Series Performance Muffler
- Choice of Two Tailpipe Exit Locations
- Uses the Factory Hanger Locations
- 3-year Limited Warranty
| 2WD/4WD |
2WD |
|
4WD |
| Brand |
Flowmaster |
| Catalytic Converter Quantity |
0 |
| Category |
Exhaust |
| Clamping Type |
Flat Band |
| Clamps Included |
Yes |
| Emission Code |
5 |
| Exhaust Series |
American Thunder |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Connection |
Clamp-On |
| Exhaust Tip Cut |
Angled |
| Exhaust Tip Diameter |
3.00 IN |
| Exhaust Tip Edge |
Rolled Edge Angle Cut |
| Exhaust Tip Finish |
Polished |
| Exhaust Tip Intercooled |
No |
| Exhaust Tip Length |
13.00 IN |
| Exhaust Tip Material |
304 Stainless Steel |
| Exhaust Tip Quantity |
2 |
| Exhaust Tip Resonated |
No |
| Exhaust Tip Shape |
Oval |
| Exhaust Tip Wall |
Single Wall |
| Exit Position |
Dual Out Rear / Dual Out Side |
| Exit Style |
Dual Out Rear |
|
Dual Out Side |
| Finish |
Aluminized |
| Gasket Or Seal Included |
No |
| Grade Type |
Performance |
| Hangers Included |
Yes |
| Heat Shield |
No |
| Inlet Diameter |
3.00 IN |
| Inlet Type |
Clamp-On |
| Main Piping Diameter |
2.50 IN |
| Material |
Aluminized Steel |
| Mounting Bracket Included |
Yes |
| Muffler (Front) Body Height |
4.00 IN |
| Muffler (Front) Body Length |
9.00 IN |
| Muffler (Front) Body Width |
8.00 IN |
| Muffler (Front) Finish |
Black High-Temperature Paint Finish |
| Muffler (Front) Type |
Chambered |
| Muffler (Rear) Body Height |
5.00 IN |
| Muffler (Rear) Body Length |
17.00 IN |
| Muffler (Rear) Body Width |
10.00 IN |
| Muffler (Rear) Finish |
Black High-Temperature Paint Finish |
| Muffler (Rear) Type |
Chambered |
| Muffler Body Material |
Aluminized Steel |
| Muffler Finish |
Black High-Temperature Paint Finish |
| Muffler Flanged Inlet |
No |
| Muffler Flanged Outlet |
No |
| Muffler Inlet Connection |
Female Ball |
| Muffler Outlet Connection |
Slip-Fit |
| Muffler Outlet Quantity |
2 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
1 |
| Muffler Series |
Super 50 Series |
| Muffler Type |
Chambered |
| Outlet Diameter |
2.50 IN |
| part type |
Exhaust System Kit |
| Pipe Material |
Aluminized Steel |
| Product Type |
Exhaust System |
| Single Dual |
Dual |
| Sound Level |
Aggressive / Moderate |
| Spring Bolt Kit Included |
No |
| Sub Category |
Exhaust and Tail Pipes |
| System Type |
Cat-back |
| Tail Pipe Outlet Outside Diameter |
2.50 IN |
| Tail Pipe Quantity |
2 |
| Tail Pipe Tapered Outlet |
No |
| Tip Diameter |
3.00 IN |
| Tip Quantity |
2 |
| Tip Shape |
Round |
| Tubing Diameter |
2.50 IN |
| Type |
Cat-Back |
| Valve Included |
No |
| Valve Type |
Not Applicable |
| UPC |
700042020591 |
