CX Racing
CXRacing Turbo Header + Cross Pipe Kit For 1st Generation 1999 - 2007 Chevrolet Silverado (GMT 800 Platform) with Vortec V8
Regular price
$1,500.00
Shipping calculated at checkout.
MF-LS-TRUCK-KIT
CXRacing Turbo Header + Cross Pipe Kit For 1st Generation 99-07 Chevrolet Silverado (GMT 800 Platform) with Vortec V8.
Fits 2WD ONLY, Does NOT Fit AWD (Cross Pipe Hits Driveshaft)
This Is A Solid Proven Kit, Perfect Fitment. We Developed This Kit From Scratch, Fully Tested, See Installed Pictures On and Outside the Car.
Perfect Fitment. Keeps All Stock Parts and Accessories. No Cut, No Relocation (Except MAF Sensor Wires Need to Be Cut and Extended).
Single Big T4 Turbo Provision, Supports 700-800 WHP.
60mm Vband WG and 50mm BOV Provision.
2.5" Cross Pipe, Excellent Ground Clearance. Above Oil Pan Level.
Much Better Response Compare to Rear Mount Turbo Setup.
Note:
We Offer Different Combinations Of This Turbo Kit. The One Being Sold Is Header and Cross Pipe Hardware Kit ONLY.
Downpipe, Turbo, WG, BOV, Intercooler Kit Are NOT Included. Check Our Other Products for Different Offerings.
Application:
Chassis: 99-07 Chevrolet Silverado
Motor: LM, LQ Vortect V8
Note:
This Kit Is Developed Based on A 2002 Silverado, It Should Fit Other GMT800 Platform Vehicles.
Product Being Sold:
Turbo Headers + Cross Pipe + Vband Clamps
This is CXRacing's Newest Products for the Application Stated Above. All Parts Are Developed from Ground Up in Our R&D Center in USA, Designed and Built for Improved Performance Gains, with Excellent Fitment and Easy Installation.
This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don't guarantee fitment. Modification is needed and we won't accept return due to Right-Hand-Drive fitment issues.
Product Info and Spec:
Manifold:
CXracing's Proprietary Design, Keeps All Stock Parts and Accessories
Stainless Steel 1.65" Runner Tube
Works With CXRacing's T4 Turbo Elbow Adapter. Flexible Fitment For Many Turbos
60mm Vband Wastegate Provision
2.5" Cross Pipe with Vband Connections
Notes:
-Off Road or Track Use ONLY, NOT for Street Use
-Due to the Complexity of Converting a Motor from NA to Turbo, Please Make Sure that You Understand the Application Stated Here are the Right Parts for Your Project
-Parts Being Sold are the Kit Being Advertised ONLY. Other Parts Shown on Pictures are for Demo Only .
Fits 2WD ONLY, Does NOT Fit AWD (Cross Pipe Hits Driveshaft)
This Is A Solid Proven Kit, Perfect Fitment. We Developed This Kit From Scratch, Fully Tested, See Installed Pictures On and Outside the Car.
Perfect Fitment. Keeps All Stock Parts and Accessories. No Cut, No Relocation (Except MAF Sensor Wires Need to Be Cut and Extended).
Single Big T4 Turbo Provision, Supports 700-800 WHP.
60mm Vband WG and 50mm BOV Provision.
2.5" Cross Pipe, Excellent Ground Clearance. Above Oil Pan Level.
Much Better Response Compare to Rear Mount Turbo Setup.
Note:
We Offer Different Combinations Of This Turbo Kit. The One Being Sold Is Header and Cross Pipe Hardware Kit ONLY.
Downpipe, Turbo, WG, BOV, Intercooler Kit Are NOT Included. Check Our Other Products for Different Offerings.
Application:
Chassis: 99-07 Chevrolet Silverado
Motor: LM, LQ Vortect V8
Note:
This Kit Is Developed Based on A 2002 Silverado, It Should Fit Other GMT800 Platform Vehicles.
Product Being Sold:
Turbo Headers + Cross Pipe + Vband Clamps
This is CXRacing's Newest Products for the Application Stated Above. All Parts Are Developed from Ground Up in Our R&D Center in USA, Designed and Built for Improved Performance Gains, with Excellent Fitment and Easy Installation.
This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don't guarantee fitment. Modification is needed and we won't accept return due to Right-Hand-Drive fitment issues.
Product Info and Spec:
Manifold:
CXracing's Proprietary Design, Keeps All Stock Parts and Accessories
Stainless Steel 1.65" Runner Tube
Works With CXRacing's T4 Turbo Elbow Adapter. Flexible Fitment For Many Turbos
60mm Vband Wastegate Provision
2.5" Cross Pipe with Vband Connections
Notes:
-Off Road or Track Use ONLY, NOT for Street Use
-Due to the Complexity of Converting a Motor from NA to Turbo, Please Make Sure that You Understand the Application Stated Here are the Right Parts for Your Project
-Parts Being Sold are the Kit Being Advertised ONLY. Other Parts Shown on Pictures are for Demo Only .
Click Below Picture to Watch Dyno Video :
Share this Product
- choosing a selection results in a full page refresh
- Opens in a new window.
- Opens external website in a new window.