Edelbrock part #7525 RPM Air-Gap dual-quad intake manifold is designed for 1955-86 S/B Chevys, this intake stands 1-5/8" taller than the low-profile C-26 intake and offers performance improvements in the 1500-6500 rpm range. The large runners feature our unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge. Will not fit under stock Corvette hood.

More Information

Manufacturer	Edelbrock
Application	Application Specific
UPC	085347075256
Series	Dual-Quad/Multi Carb
Material	Aluminum
Finish	Satin
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	1500-5500 RPM
Emissions Code
Application Summary	Chevrolet:Small-Block Gen I:262 (4.3L)-400 (6.6L)
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Manifold ht: A-4.57", B-5.20" Carb pad height: 4.89" Carb recommendations: Edelbrock AVS2 Series # 1903 and # 1904, 500 cfm. Port exit dimensions: 1.16" x 1.92" Recommended intake gasket: Edelbrock #7201 Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS. Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage. NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal. DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread. Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. H.E.I. will not fit Carb center-to-center distance: 6-7/16".
Rear Maximum Height	5.200 in
Single Or Dual Plane Type	Dual