GSC P-D 2006 - 2007 2.5L WRX & 2004 - 2007 STi S3 Cams 282/282 Billet
7025S3
GSC Power-Division billet S3 camshafts for the USDM STi and WRX with Intake only AVCS. These camshafts are built to suit high horsepower cars with a power range of 750-1000 WHP and a rev range of 4500-9500 RPMs. Specific engine modifications are required to utilize the true potential of these camshafts including a built bottom-end (sleeved or closed deck reccomended), built/ported heads (casting must be clearanced for higher lift), and upgraded valve springs. A standalone ECU or tune with speed density is highly reccomended in order for proper idle characteristics.
GSC Power-Division billet S3 camshafts for the USDM STi and WRX with Intake only AVCS. These camshafts are built to suit high horsepower cars with a power range of 750-1000 WHP and a rev range of 4500-9500 RPMs. Specific engine modifications are required to utilize the true potential of these camshafts including a built bottom-end (sleeved or closed deck reccomended), built/ported heads (casting must be clearanced for higher lift), and upgraded valve springs. A standalone ECU or tune with speed density is highly reccomended in order for proper idle characteristics.
- Check Pictures for cam placement. Long nose = Left Side, short nose = Right Side
- Due to the lobe size, head castings will need to be filled down slightly for clearance - Please check during install
- Proper break in and running high zinc oil is a must on flat tappet engines.
- Must be installed by an experienced technician
| 7025S3 | ADV Duration | Duration @ 0.040" | Peak Lift | Center Line |
| Intake | 280° | 240° | 11.55mm | 130° |
| Exhaust | 280° | 241° | 11.60mm | 115° |
Share this Product
- choosing a selection results in a full page refresh
- Opens in a new window.
- Opens external website in a new window.