HKS

HKS Hipermax R 2015 + Mazda Miata ND / ND2 ND5RC Full Kit Coilover

$2,900.00

Shipping calculated at checkout.

Part #: hks80310-AZ002

Code No. 80310-AZ002

The fun to drive at will and the balance can be adapted from circuit to winding road.
Reised Driving-Comfort, "Ultimate All-Rounder"

The model in the photo is ND5RC.

Application

Engine	P5-VP
Model Year	15/05 -
Remarks	Cultivated with SpecialPackage MT and LeatherPackage AT vehicles

Specification

	FRONT	REAR
Damping force adjustment	30 steps	30 steps
Base valve	-	-
Height adjustable lower bracket	〇	〇
Upper mount	Spherical bearing	Spherical bearing
Inverted/Normal type	Normal	Normal
Damper/Spring layout	Coilover	Coilover
Spring rate change at factory	Possible	Possible
Damping force adjustment with wire	-	〇
Helper spring (Spring rate N/mm)	-	〇 (19.8)

Ride Heightmm

		Factory *2	Test data	Adjustable range High - Low *3	Drivable range High - Low *4
FRONT	Ride height *1	619	605	655 ～ 605	655 ～ 605
FRONT	Against stock	-36	-50	0 ～ -53	0 ～ -50
REAR	Ride height *1	617	607	651 ～　607	651 ～　607
REAR	Against stock	-41	-51	-7 ～ -51	-7 ～ -51

*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.

Kit information

Spring of Full Kit

	F	R
Spring rate N/mm(kgf/mm)	78 ( 8.0 )	59 ( 6.0 )
Free height (mm)	200	200
Spring type	Straight	Straight
Recommended range to change spring rate N/mm(kgf/mm)	±10 ( 1 )	+10 ( 1 )

Specification of damper

	F	R
Damping force (Rebound/Damping)N*	849 / 407	241 / 343
Default position of dial	15	15
Remaining damper stroke (Rebound/Damping)mm	36 / 63	56 / 70

* The value of the damping force is at piston speed of 0.1m/sec.

Setting data

	F				R
	Default	Test	Drivable limit High *	Drivable limit Low *	Default	Test	Drivable limit High *	Drivable limit Low *
Length of case (mm)	345	335	371	335	335	326	366	326
Spring Set length(mm)	199	←	199	199	257	←	257	257
Length to ride hight adjuster (mm)	55	45	81	45	54	45	85	45
Lever ratio	1.40				1.10

* Refer to the above explanation *3 of ride height information for drivable high and low limitations.

Test vehicle information

		F	R
Vehicle weight kg		-　(530)	-　(480)
Tire size (Air pressure) kPa		215 / 40 - 17 ( 200 )	215 / 40 - 17 ( 200 )
Wheel size		7.5 JJ × 17 inset 38	7.5 JJ × 17 inset 38
Alignment (Toe/Camber)	Test data	0 mm / -2°30'	0 mm / -2°19'
Alignment (Toe/Camber)	Standard value	in 1.6 ± 2 mm / -0°30' ± 0°45'	in 3 ± 2 mm / -1°23' ± 0°45'

* Test data at HKS.

Parts List * It may be changed without prior notice.

Point

HIPERMAX R is born with the latest theory in addition to cultivated through the popular HIPERMAX IV SP. A thorough review of each component and the know-how cultivated through the HIPERMAX S were totally utilized, resulting in an amazing evolution.
The new kit is released by equipping the new parts in addition to the know-how cultivated by HKS. The ride quality has been changed from conventional dampers.
The ND Roadster model has bonded bracket bushings with the front and rear stabilizers. When the ride height is lowered from stock condition, the stabilizer constantly absorbs the bush reaction force, which prevents coilover from performing well.
Three settings of stabilizer were thoroughly tested at Fuji Speedway: adoption of the stock stabilizer with bonded bushings, adoption of stabilizer with detachable bushing, adoption without stabilizer.
The test vehicle is the "S Special Package" model, and a strut tower bar that is factory-installed on the "NR-A" model was also adopted for the test.
At Fuji Speedway, please make adjustments according to your preference from 5 notches back from the front and rear tightening side.
By installing front and rear retainers, the rate change is minimized while the spring is compressed and abrupt movement changes are suppressed.
Although it is the vehicle height at testing, there is a risk that the kit is interferenced with the inner fender depending on the tire size, model or suspension alignment.

HKS Hipermax R 2015 + Mazda Miata ND / ND2 ND5RC Full Kit Coilover

Share this Product