Competition/Traction Bar Kit For the 1992-2000 Honda Civic EG/EH/EJ/EK/EM and 1994-2001 Acura Integra DC) . Designed to replace the stock Crossmember of the Civic EG/EH/EJ/EK/EM and Acura Integra DC.

• Works With M/T
• Gives Extra Front Clearance
• Clears All Factory Headers
• Enhances Vehicle Rigidity and Overall Driving Accuracy
• CAD/CAM Designed
• Stress Analyzed
• Lifetime Warranty

Note:
In order to fit this traction bar onto an EM1 Civic you will need the forks and lower control arms of the DX/LX/EX models.

The Innovative Mounts Competition/Traction Bar Kit is designed to increase the rigidity and stability of the vehicles Front suspension.
By tying-in the Front lower control arms to the frame, the Front suspension becomes more solid, thus increasing traction and eliminating wheel-hop.
For Front wheel drive drag racers and road racers, this directly results in reduced 60-ft times and increased cornering Speeds. The design of the bar not Only reduces unwanted lateral lower arm movement, but also ties the lower Chassis legs together providing a much more rigid and stronger Setup.
This Comp/Traction bar Kit is powder-coated for durability and corrosion resistance, as are the steel radius arms. Each radius arm is equipped With a race grade heim/spherical joint allowing for an OEM fitment that is adjustable to suit all vehicle Setups, whether a pre-load is needed or just to stop unwanted movement that can cause changes in suspension geometry during high Speed cornering or launching.
The Comp/Traction bar will work With Engine Swaps and can be used With full or half sized Radiators.
Due to its slim design it will also accept the use of larger down pipes and manifolds.

Note:
It is strongly recommended that all installs be done by a mechanic or automotive specialist.
Mounts Can Not be returned or Swapped out after they have been Bolted down revealing Bolt impressions).
Please Make sure this Kit fits your vehicle before Bolting them in place.
Innovative Engine Mounts are built for performance driving.
Although Innovatives bushings are made to absorb Engine vibration, you may still notice slight vibration depending on your Engines Series and HP.
Innovative Mounts removes the dampening oil containers harbored by OEM/Stock Mounts.
By switching to stiffer Mounts without the fluid reduces wheel hop and increases driving response.

Weight: 22lbs