Integrated Engineering FDS Intercooler Kit for VW MK7/MK8 & Audi 8V/8Y 2.0T & 1.8T Gen 3 | Fits MQB GTI, Golf R, GLI, Golf, A3, S3

$1,260.00

Shipping calculated at checkout.

IETPCI1B

E FDS™ MQB intercoolers for MQB MK7, MK8, 8V, 8Y 2.0T & 1.8T engines are powered by a massive (425mmX621mmX70mm) bar & fin core. This gives you 137% more core volume over the stock intercooler and brings you incredibly efficient cooling properties to combat heat soak, lower intake air temperatures, and keep you in the highest power output possible from your ECU tune and performance hardware upgrades. This is the single largest intercooler on the market today.

CORE SIZE
137% LARGER
THAN STOCK

INTAKE AIR TEMPS
74% LOWER
THAN STOCK

PRESSURE DROP
9% LOWER
THAN STOCK

LEADING FEATURES

Internal FDS design forces airflow evenly through intercooler core
Lowers intake air temp (IAT) 74% lower than stock
137% larger core size than stock
Defends against power robbing heat soak
Recovers from heat soak faster
600+ horsepower capable design
Increases horsepower and torque
Used on record-breaking cars
OEM location allows for the massive core size
425mmX621mmX70mm bar & fin core size
9% lower pressure drop than stock
Outperforms smaller "front-mount" designs
In-house CNC machined aluminum cast end tanks
Hand TIG welded and pressure tested in USA
Bolt-in hassle free design for easy install
Reinforced mounting brackets and bosses for reliability
Computational Fluid Dynamic (CFD) optimized
High-grip and beveled inlet/oulets for boost-leak free connections
Compatible with Adaptive Crusie Control (ACC)

THE ONE AND ONLY FDS™

When it comes to cooling air flow, it's all about efficiency. IE's Flow Distribution System (FDS) is light years ahead of other intercoolers, delivering an effective use of the entire core by utilizing precisely shaped fins to force air flow evenly across the entire surface. As a result, the IE FDS intercooler has been proven to drastically reduce intake air temperatures more so than any other units available on the market -offering the largest power gains possible.

NO BOOST LEAKS

Nothing is worse than a boost leak! Advanced CNC machining of the inlet and outlet produces a high-grip surface that locks the silicone into place. A flat stop edge prevents the hose from being installed too far forward while a beveled edge adds enhanced grip for the hose clamp to stop it from sliding back. This high attention to detail creates a friction grip keeping your boost hoses in place for good.

ELIMINATE HEAT SOAK

Heat soak occurs when the heat generated exceeds the cooling capacity of the intercooler. The most common symptom is the noticeable loss of power after long term acceleration or several back-to-back power pulls. By greatly increasing the core size and useable area of the core with FDS technology, we have eliminated the heat soak, keeping the intake air temperatures consistently lower than OEM and competition intercoolers.

INTAKE AIR TEMPS

PRESSURE DROP (LESS IS BETTER)

DYNO RESULTS

Real-world power numbers are achieved using our in-house dyno cells to see the effect the effect the intercooler upgrade has on horsepower and torque. The testing was performed in controlled conditions and performed the same day back to back.

VEHICLE FITMENT GUIDE

MAKE	MODEL	YEAR	ENGINE
AUDI	S3 (8Y)	2022+	2.0T
AUDI	S3 (8V)	2015-2021	2.0T
AUDI	A3 (8Y)	2022+	2.0T
AUDI	A3 (8V)	2015-2021	2.0T & 1.8T
VW	Golf R (MK7)	2015-2021	2.0T
VW	GTI (MK8)	2022+	2.0T
VW	GTI (MK7)	2015-2021	2.0T
VW	GLI (MK7)	2019+	2.0T
VW	Golf (MK7)	2015-2021	1.8T
VW	Alltrak (MK7)	2015-2021	1.8T

*MK8 (2022+) Golf R fitment is not yet verified, update coming soon!

*2022+ MK8 & 8Y vehicles may require very minor trimming of the plasic radiator shroud during install.

*Due to the massive size and tight tolerances of this intercooler, some aftermarket radiators may not fit.