Mishimoto 2015 - 2020 BMW F80 M3/M4 Oil Cooler Kit

2015-2020 BMW M3/M4 Oil Cooler Kit by Mishimoto

Add some much-needed durability and cooling power to your M3 or M4 with the Mishimoto 2015-2020 BMW M3/M4 Oil Cooler kit. True to form, the BMW engineers designed the M3/M4's oil cooler with efficient space use in mind. Suspended perpendicular from the rest of the cooling stack, this location utilizes the Bimmer's aerodynamics in order to cool the oil, all while putting the lightweight, tube-and-fin cooler in harm's way of road hazards.

We here at Mishimoto made sure to beef up the entire oil cooling system design for the F80/82 with our performance oil cooler. We ditched the lightweight design for a full aluminum, TIG-welded bar-and-plate cooler for added strength and cooling. The bars and plates are a much more robust form of heat exchanger core construction intended for improved heat transfer and have the strength to shrug off potential road debris, keeping your oil temps down and where it should be. We also added 10mm to the core's thickness, equating in a 46% increase in core volume, and increased the oil capacity by .4 qt.

In addition we wanted to add an extra degree of protection to the system by improving on the lines. From the factory, these vehicles are equipped with unforgiving hardlines that are prone to abrasion and corrosion damage. Our oil cooler kit provides a pair of application-specific, flexible, and robust nylon braided lines for a more secure channel for your M's oil. Also included are our specially designed adaptors allowing for AN fittings from the S55's oil pump and a secure connection to the oil cooler.

Features

• Kit includes oil line fitting kit, along with oil cooler adapters for use of nylon braided lines
• Full aluminum TIG-welded construction
• 46% increase in core volume

Benefits

• Increases Reliability by Keeping Oil Temperature Lower

Please Note: It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact sales@mishimoto.com.

Applications

• 2015-2020 BMW M3
• 2015-2020 BMW M4

What's In The Box?

• 1 - Oil Cooler
• 1 - 1ft, 10in Nylon Braided hose with 45° and 70° -10AN Fittings
• 1 - 3ft, 3in Nylon Braided Hose with 45° and 90° -10AN Fittings
• 1 - Oil Line Fitting Kit
• 1 - Application Specific Oil Cooler Adaptors
• 1 - Braided Line Separator Bracket