CX Racing Turbo Kit (Header , Downpipe, Intercooler) FOR 13-15 Camaro LS3 6.2 NA-T LS
- Product Code: TRB-KIT-LS-CAMARO0915-IC
XRACING TURBO + INTERCOOLER + PIPING KIT FOR 2013-2015 CHEVROLET CAMARO WITH LS3 ENGINE SINGLE TURBO NA-T
304 Stainless High Flow Header
T4 T76 Turbo, with 0.81 AR Exhaust Housing, Fast Spool. Makes Big Power (with Built Engine, Should Make 500-600 WHP at Around 15-18 PSI, or 400-500 WHP at 8-10 PSI)
Dual 44mm Vband Wastegate
3" Intercooler with Polished Aluminum Piping.
3" Stainless Steel Downpipes, Connect to Stock Catback Exhaust System
NOTE:
1. This Kit ONLY Fits Electric Power Steering, Does NOT Fit Traditional Power Steering Which Has a Pump At the Corner of the Engine (2009-2012 Model Year).
2. Need to Drill and Weld Oil Return Bung on Oil Pan (Need to Drop the Front Sub-Frame to Remove Oil Pan)
3. Need to Relocate Coil Packs (New Brackets Included)
4. Need to Run Longer Spark Plug Wire (NOT Included)
5. Need to Upgrade Fuel System (Such As Fuel Pump, Injectors, Spark Plug Etc, Not Included)
6. Need to Extend O2 Sensor Wires (NOT Included)
7. Need to Re-Tune the Engine (Talk to Your Tuner First)
Installation Guide Is Available From Our Website
This is CXRacing's Newest Product for The Application Stated. All Products Are Developed from The Ground up in Our R&D Center Based in The USA. Our Parts Are Designed and Built for Improved Performance Gains, with Excellent Fitment and Ease of Installation.
APPLICATION(S):
- Chassis: 13-15 Chevrolet Camaro
- Engine: LS3
- Turbo: T76 Turbo
Note:This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don’t guarantee fitment. Modification is needed and we won’t accept return due to Right-Hand-Drive fitment issues.
This Item is for the Turbo Manifold Downpipe and Intercooler Kit ONLY and All Other Parts Shown are NOT INCLUDED. We Do Offer Different Combination of Kits Which Include These Other Products Shown, Please Check Our Other Website Items or Contact Us For More Information.
PRODUCT(S):
- T76 Turbo Charger x1
- Twin Turbo Header Downpipe Kit x1
- 44MM 8Psi V Band Wastegate x2
- Oil Filter Sandwich and Oil Line Kit x1
- Set of Vband Clamp x1
- Aluminum Intercooler, with Mounting Brackets x1
- Aluminum Intercooler Piping Kit x1
- Set of Silicon Hose x1
- Set of T-bolt Clamp x1
- Blow Off Valve x1
- Mushroom Air Filter x1
- Coil Pack Relocation Bracket x2
TECHNICAL SPECIFICATIONS:
T76 TURBO CHARGER
Air Inlet
|
4"
|
Compressed Air Outlet
|
2.5"
|
Bearing
|
Wet Floating Bearings
|
Turbine Housing Flange
|
Standard T4
|
Exhaust Outlet
|
3" V-Band
|
Cooling
|
Oil Cooled
|
Compressor
|
76mm
|
Turbine
|
0.81 A/R
|
Compressor Wheel (Major/Exducer)
|
102.4mm/76.7
|
Turbine Wheel (Major/Inducer)
|
74.1mm/64.6mm
|
BELOW ARE INSTALLATION PICTURES:
Share this Product
- choosing a selection results in a full page refresh
- Opens in a new window.
- Opens external website in a new window.