MaxTrac 15-18 Ford F-150 2WD 7in/4in MaxPro Spindle Lift Kit w/MaxTrac Shocks

Part #: mxtK883274

The Maxtrac Suspension 7-inch lift for the Ford F150 is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. We then install a Maxtrac strut spacer on top of the factory strut to complete the front lift. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Maxtrac twin-tube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.

NOTES:

• 7 in. Lift; Incl. Front Lift Spindles With Brake Lines/Front 2.5 in. Front Strut Spacers/Rear Blocks/U-Bolts/Rear MaxTrac Shocks

2WD ONLY P/N: 703440 Front Component Box: - 4.5" Lift Spindles - Extended DOT compliant steel braided brake lines P/N: 903240 Rear Component Box - 2.5" Front Strut Spacers - 4" Rear Blocks and U-Bolts - MaxTrac Rear Shocks (3200LL-4) Wheel & Tire Fitment: - Track width increase of .5" per side - 17" wheel or larger with 6.25" backspacing or less (up to 9" wide) - Works with stock wheels as well - Clears up to a 35" x 12.50" tire NOTE: - Prior to installation"measuring is required when selecting a wheel & tire combination. - Trimming may be required for optimal fender well clearance.

MAXTRAC SUSPENSION DOES NOT ADVISE USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES