The Force II® system is designed to replace the original factory mufflers located behind the rear axle using factory style connections. With easy fit in mind, these stainless steel systems are mandrel-bent for maximum performance, feature specially-engineered 80 Series™ mufflers that have a deep moderate performance tone outside the car, with little to no interior resonance in the cab. The system uses the factory hangers and are finished off with quad 3.00-inch polished 304 stainless steel tips. Includes all necessary parts, hardware and instructions for a quick and easy installation. Force II systems are suited to customers looking for efficiency improvements without a lot of noise. Like all Flowmaster® systems, the benefits include improved throttle response, power and mileage.
Features:
- Includes Hangers and Hardware for an Easy Installation
- Specially Designed 80 Series Performance Mufflers
- Mandrel-bent 16 Gauge Stainless Steel Tubing
- Highly Polished Quad 304 Stainless Steel Tips
- Deep Moderate Exterior Exhaust Tone
- Lifetime Limited Warranty
- Easy Installation
| 2WD/4WD |
2WD |
| Brand |
Flowmaster |
| Catalytic Converter Quantity |
0 |
| Category |
Exhaust |
| Clamping Type |
Flat Band |
| Clamps Included |
Yes |
| Emission Code |
5 |
| Exhaust Series |
Force II |
| Exhaust Tip Color |
Silver |
| Exhaust Tip Connection |
Welded |
| Exhaust Tip Cut |
Angled |
| Exhaust Tip Diameter |
3.00 IN |
| Exhaust Tip Edge |
Rolled Edge Angle Cut |
| Exhaust Tip Finish |
Polished |
| Exhaust Tip Intercooled |
No |
| Exhaust Tip Length |
6.00 IN |
| Exhaust Tip Material |
304 Stainless Steel |
| Exhaust Tip Quantity |
4 |
| Exhaust Tip Resonated |
No |
| Exhaust Tip Shape |
Round |
| Exhaust Tip Wall |
Single Wall |
| Exit Position |
Dual Out Rear |
| Exit Style |
Dual Out Rear |
| Finish |
Natural |
| Gasket Or Seal Included |
Yes |
| Grade Type |
Performance |
| Hangers Included |
Yes |
| Heat Shield |
No |
| Inlet Diameter |
2.50 IN |
| Inlet Type |
Flanged |
| Main Piping Diameter |
2.50 IN |
| Material |
409 Stainless Steel |
| Mounting Bracket Included |
No |
| Muffler (Left) Body Height |
5.00 IN |
| Muffler (Left) Body Length |
17.00 IN |
| Muffler (Left) Body Width |
10.00 IN |
| Muffler (Left) Type |
Chambered |
| Muffler (Right) Body Height |
5.00 IN |
| Muffler (Right) Body Length |
17.00 IN |
| Muffler (Right) Body Width |
10.00 IN |
| Muffler (Right) Type |
Chambered |
| Muffler Body Height |
5.00 IN |
| Muffler Body Length |
23.00 IN |
| Muffler Body Material |
409 Stainless Steel |
| Muffler Body Shape |
Oval |
| Muffler Body Width |
10.00 IN |
| Muffler Finish |
Black High-Temperature Paint Finish |
| Muffler Flanged Inlet |
No |
| Muffler Flanged Outlet |
No |
| Muffler Inlet Connection |
Slip-Fit |
| Muffler Inlet Inside Diameter |
2.50 IN |
| Muffler Inlet Outside Diameter |
2.00 IN |
| Muffler Outlet Quantity |
2 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
2 |
| Muffler Series |
80 Series Crossflow |
| Muffler Type |
Chambered |
| Outlet Diameter |
2.00 IN |
| part type |
Exhaust System Kit |
| Pipe Material |
409 Stainless Steel |
| Product Type |
Exhaust System |
| Single Dual |
Dual |
| Sound Level |
Moderate/Mild |
| Spring Bolt Kit Included |
No |
| Sub Category |
Exhaust and Tail Pipes |
| System Type |
Axle-back |
| Tail Pipe Outlet Outside Diameter |
2.50 IN |
| Tail Pipe Quantity |
2 |
| Tail Pipe Tapered Outlet |
No |
| Tip Diameter |
3.00 IN |
| Tip Quantity |
4 |
| Tip Shape |
Round |
| Tube Diameter |
2.50 IN |
| Tubing Diameter |
2.50 IN |
| Type |
Axle-Back |
| Type of Exhaust |
Axle Back |
| Valve Included |
No |
| Valve Type |
Not Applicable |
| UPC |
700042025633 |
