This Flowmaster Force II® cat-back exhaust system is custom designed for 2000-2003 Dodge Dakota truck with 4.7L, 5.2L or 5.9L engine and is perfect for the person looking for a moderate sound level inside and outside of the truck, with all of the performance benefits that you would expect from Flowmaster®. This bolt-on emissions-legal system features a mandrel-bent aluminized steel inlet pipe flowing into a Super 50™ Series muffler for a mild performance exterior sound. The single 3.00-inch aluminized steel mandrel-bent tailpipe is finished off with a large 3.50-inch polished embossed stainless steel tip. The exhaust system is covered by our 3-year Limited Warranty and includes all necessary parts, hardware and instructions for a quick and easy installation you can do at home. Note: Fits 2/4 wheel drive models and all wheelbases.
Features:
- Includes Hangers and Hardware for an Easy Installation
- Mandrel-bent 16 Gauge Aluminized Steel Tubing
- Large 3.50-inch Polished 304 Stainless Steel Tip
- Mild Performance Exterior Exhaust Tone
- Dyno Tuned for Maximum Performance
- Super 50 Series Performance Muffler
- Uses the Factory Hanger Locations
- 3-year Limited Warranty
| 2WD/4WD |
2WD |
|
4WD |
| Brand |
Flowmaster |
| Catalytic Converter Quantity |
0 |
| Category |
Exhaust |
| Clamping Type |
U-Bolt |
| Clamps Included |
Yes |
| Emission Code |
5 |
| Exhaust Series |
Force II |
| Exhaust System Kit Type |
Cat-Back |
| Exhaust Tip Connection |
Clamp-On |
| Exhaust Tip Cut |
Angled |
| Exhaust Tip Diameter |
3.50 IN |
| Exhaust Tip Edge |
Rolled Edge Angle Cut |
| Exhaust Tip Finish |
Polished |
| Exhaust Tip Intercooled |
No |
| Exhaust Tip Length |
12.00 IN |
| Exhaust Tip Material |
304 Stainless Steel |
| Exhaust Tip Quantity |
1 |
| Exhaust Tip Resonated |
No |
| Exhaust Tip Shape |
Oval |
| Exhaust Tip Wall |
Single Wall |
| Exit Position |
Single Side Exit |
| Exit Style |
Single Side Exit |
| Finish |
Aluminized |
| Gasket Or Seal Included |
No |
| Grade Type |
Performance |
| Hangers Included |
Yes |
| Heat Shield |
No |
| Inlet Diameter |
2.50 IN |
| Inlet Type |
Clamp-On |
| Main Piping Diameter |
3.00 IN |
| Material |
Aluminized Steel |
| Mounting Bracket Included |
No |
| Muffler (Left) Body Height |
5.00 IN |
| Muffler (Left) Body Length |
17.00 IN |
| Muffler (Left) Body Width |
10.00 IN |
| Muffler (Left) Type |
Chambered |
| Muffler (Right) Body Height |
5.00 IN |
| Muffler (Right) Body Length |
17.00 IN |
| Muffler (Right) Body Width |
10.00 IN |
| Muffler (Right) Type |
Chambered |
| Muffler Body Material |
Aluminized Steel |
| Muffler Body Shape |
Oval |
| Muffler Finish |
Black High-Temperature Paint Finish |
| Muffler Flanged Inlet |
No |
| Muffler Flanged Outlet |
No |
| Muffler Inlet Connection |
Slip-Fit |
| Muffler Inlet Inside Diameter |
2.50 IN |
| Muffler Inlet Outside Diameter |
2.63 IN |
| Muffler Outlet Connection |
Slip-Fit |
| Muffler Outlet Quantity |
1 |
| Muffler Part Number |
Kit Only |
| Muffler Quantity |
1 |
| Muffler Series |
Super 50 Series |
| Muffler Type |
Chambered |
| Outlet Diameter |
3.00 IN |
| part type |
Exhaust System Kit |
| Pipe Material |
Aluminized Steel |
| Product Type |
Exhaust System |
| Single Dual |
Single |
| Sound Level |
Moderate/Mild |
| Spring Bolt Kit Included |
No |
| Sub Category |
Exhaust and Tail Pipes |
| System Type |
Cat-back |
| Tail Pipe Outlet Outside Diameter |
3.00 IN |
| Tail Pipe Quantity |
1 |
| Tail Pipe Tapered Outlet |
No |
| Tip Diameter |
3.50 IN |
| Tip Quantity |
1 |
| Tip Shape |
Round |
| Tubing Diameter |
3.00 IN |
| Type |
Cat-Back |
| Valve Included |
No |
| Valve Type |
Not Applicable |
| UPC |
700042016600 |
