HKS

HKS Hipermax S Mitsubishi 2003 - 2007 Lancer Evolution CT9A Front Pillow Ball Full Kit Coilovers

$2,222.05

Shipping calculated at checkout.

80300-AM002P

Another type of HIPERMAX S that employs the pillow ball spherical bearing at the front upper mount has been newly added.

The front upper mount employs the pillow ball spherical bearing. It makes it possible to change the camber angle compared to the existing rubber bearing type of the HIPERMAX S. A direct handling feeling of the car from the pillow ball top mount brings more joy to driving.
It achieves both ride comfort and sports performance at a higher level by reviewing the damping force.
Accomplish the suspension to provide a sense of stability based on the flexible setting to optimize the speed of the car roll for improving the roll rigidity.
3-year warranty is included for the highly durable product with the reconsidered internal parts.

The model in the photo is CT9A.

Application

Engine	4G63
Model Year	06/08 - 07/09
Remarks

Specification

	FRONT	REAR
Damping force adjustment	30 steps	30 steps
Base valve	-	-
Height adjustable lower bracket	〇	〇
Upper mount	Spherical bearing	Rubber
Inverted/Normal type	Inverted	Normal
Damper/Spring layout	Coilover	Coilover
Spring rate change at factory	Possible	Possible
Damping force adjustment with wire	-	-
Helper spring (Spring rate N/mm)	-	〇 (19.8)

Ride Heightmm

		Factory *2	Test data	Adjustable range High - Low *3	Drivable range High - Low *4
FRONT	Ride height *1	660	←	686 ～ 635	686 ～ 635
FRONT	Against stock	-34	←	-8 ～ -59	-8 ～ -59
REAR	Ride height *1	650	←	661 ～　595	661 ～　595
REAR	Against stock	-16	←	-5 ～ -71	-5 ～ -71

*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.

Kit information

Spring of Full Kit

	F	R
Spring rate N/mm(kgf/mm)	78 ( 8.0 )	59 ( 6.0 )
Free height (mm)	250	200
Spring type	Straight Barrel type	Straight
Recommended range to change spring rate N/mm(kgf/mm)	-20 ( 2 )	±20 ( 2 )

Specification of damper

	F	R
Damping force (Rebound/Damping)N*	888 / 476	693 / 373
Default position of dial	15	15
Remaining damper stroke (Rebound/Damping)mm	35 / 71	70 / 63

* The value of the damping force is at piston speed of 0.1m/sec.

Setting data

	F				R
	Default	Test	Drivable limit High *	Drivable limit Low *	Default	Test	Drivable limit High *	Drivable limit Low *
Length of case (mm)	279	←	297	265	401	←	409	364
Spring Set length(mm)	244	←	238	253	252	←	252	256
Length to ride hight adjuster (mm)	35	←	59	12	149	←	157	108
Lever ratio	1.08				1.35

* Refer to the above explanation *3 of ride height information for drivable high and low limitations.

Test vehicle information

		F	R
Vehicle weight kg		889　(870)	570　(540)
Tire size (Air pressure) kPa		245 / 40 - 18 ( 220 )	245 / 40 - 18 ( 190 )
Wheel size		9.0 JJ × 18 inset 22	9.0 JJ × 18 inset 22
Alignment (Toe/Camber)	Test data	in 0 mm / -1°53'	in 2 mm / -1°20'
Alignment (Toe/Camber)	Standard value	0 ± 2 mm / -2°00' ± 30'	in 3 ± 2 mm / -1°00' ± 30'

* Test data at HKS.

Parts List * It may be changed without prior notice.

HKS Hipermax S Mitsubishi 2003 - 2007 Lancer Evolution CT9A Front Pillow Ball Full Kit Coilovers

Share this Product