Smarty 07-12 Dodge Ram Cummins 6.7L Diesel S-67 Tuner *2010-2012 Will Need Software Update*

Part #: smtS-67

Smarty S-67 / Smarty-S67

*10 different CaTCHER softwares
*DTC (Diagnostic Trouble Codes) reader with
 on-screen plain text interpretation of the codes.
*ABS programming for tire height adjustment (from 22,5" to 44")
*Upgrades through built in USB connector
*Automatic recovery of the ECM in case of an interrupted update.
*about 5.5 minutes required to update ECM

Fast guide to Smarty's special Features
* CaTCHER software's inside * Ten different performance levels
* Fastest download in the industry, up to three times faster than
the competition, a typical ECM update takes about 5 minutes
* ABS tire height updates in just few seconds
* Manual High Idle is enabled in all softwares
With the Truck in park, activate cruise control. When dash light
illuninates hit set, this will activate high-idle. Use accell button on
steering wheel to set the rpm's in increments to the level you desire.
To turn the feature off, simply hit cancel on the cruise control or
tap the brake pedal.
* Reads Diagnostic Trouble Codes in plain text
* No tools required, no fuses to pull
* USB built in for simple updates
* Free internet updates
* Most complete keyboard in the industry
* Reliable, it works off your OEM hardware
* Programmable Speed Limiter from 25 to 250 mph
* Programmable parameters for fine tuning
* TNT softwares under advanced development

*** Unlike the Smarty S06 for the 5.9L, the Smarty S67 is not untraceable

Fast guide to Smarty's software levels
The horsepower settings. except #0, all other softwares have a
modified "Torque management" ( TQM ). The throttle response
is greatly improved but is set to a safe limit. With "Safe" Smarty
means safe for your tranny and rest of the driveline.

* SW # 0 : Half power
* SW # 1 : 30 Hp increase, with added timing
* SW # 2 : 60 Hp increase, no added timing ***
* SW # 3 : 60 Hp increase, with added timing
* SW # 4 : 90 Hp increase, no added timing ***
* SW # 5 : 90 Hp increase, with added timing
* SW # 6 : 130 Hp increase, no added timing ***
* SW # 7 : 130 Hp increase, with added timing
* SW # 8 : 170 Hp increase, no added timing *** 
* SW # 9 : 170 Hp increase, with added timing  

NOTE:
REVISED: 5-10-2012

SW #0: Half power

SW #1: 30 hp with raised Timing

SW #2: "Soft" CaTCHER (Stock Timing)

SW #3: Like #2 + added Timing

SW #4: Mild CaTCHER (Stock Timing)

SW #5: Like #4 + added Timing

SW #6: CaTCHER (Stock Timing)

SW #7: Like #6 + added Timing

SW #8: Wild CaTCHER (Stock Timing)

SW #9: Like #8 + added Timing

Important notice! All softwares (except #0) use a - REDUCED TORQUE MANAGEMENT!